Managing Fire Hazards on Site
Construction sites, especially those in a transitional phase, present specific fire hazards due to frequent layout changes, mobile equipment, and divided workforces. A sound alerting system is necessary for ensuring all personnel are aware without delay. The Howler range, including the GOLink system, HO units, and site alert models, provides a tailored safety setup to match various site demands.
A Look at HO Alarms
HO alarms are independent, battery-operated devices used where hard-wired installations are impractical. Ideal for moveable cabins or outbuildings, they function autonomously.
- Loud alarm: Around 102 dB at a metre’s distance.
- Optional strobe: Some models include integrated lights for visibility.
- IP-rated: Many are suited for outdoor use or partially exposed areas.
These alarms offer additional coverage where the main alert network may not reach.
The Howler Site Alert Range
Suitable for mid-sized projects, the Site Alert system operates individually or in linked setups of up to 20 units using a simple two-core cable. When set off, all devices in the network respond simultaneously.
- Approx. 100 dB sound level at 1 metre
- Built-in visual LED for loud or noisy settings
- Recommended where cabling is straightforward
Going Wireless: Site Alert RF
website Where cabling is limited, Site Alert RF links up to 30 units over wireless. It has an line-of-sight range of around 1 km and supports multiple frequencies for interference avoidance.
Blending wireless and cabled systems is frequently the best choice for sites with varying structures.
Integrating the GOLink System
The GOLink system serves as a communication core for large, multi-zone installations, using wireless signals to link alarms.
GOLink Interface Connections
Through the Interface Unit, it’s possible to tie into turnstiles, autodiallers, CCTV, and other site safety components. Up to 127 points can interact across a site-wide network.
First Aid Callouts
Certain models (e.g. H05 GOLink) include a first aid button alongside the fire alert. The first aid signal quietly sends a location-specific assistance request, check here allowing medical needs to be flagged without general evacuation.
How to Deploy Effectively
- Zone assessment: Identify where alarms need to be noticeable, dividing the site into manageable sectors.
- Choose connection types wisely: Use hard-wired alarms where feasible, supplementing with RF in distant or pop-up areas.
- Set a maintenance routine: Schedule weekly testing and monitor battery levels.
- Training & signage: Ensure instructions are posted and team members know how to respond to alerts.
FAQs
- How many devices can be wired together?
- Up to 20 Site Alert units can be connected using 2-core cable.
- How far does the wireless version reach?
- Approx. 1 km in open-air conditions, though physical obstructions can reduce range.
- Do HO alarms need a base station?
- No, HO models are self-sufficient and do not require central control.
- Is third-party integration supported?
- Yes, external systems can be connected via the GOLink Interface Unit.
- Purpose of switch protection?
- It reduces false alarms by sounding a warning if tampered with before activation.
- Hybrid setup compatibility?
- Yes, the GOLink system allows wired and wireless units to operate on the same network.
- Will first aid alerts trigger full alarms?
- No. It sends a targeted alert to designated receivers without activating evacuation systems—unless configured otherwise.
Wrap-up
Whether your project involves one zone or several, Howler alarms—HO, GOLink, and Site Alert—deliver protection that adapt to varying conditions. For product information, planning tools or live demos, refer to the Howler section on FireSense.